Details On DTCs

B1417-87: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Signal reception error from passenger-side crash zone sensor
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. Malfunction in wiring harness between passenger-side crash zone sensor and SAS control module. Passenger-side crash zone sensor malfunction
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Passenger-side crash zone sensor installation malfunction Malfunction in wiring harness (including connector/terminal) between passenger-side crash zone sensor and SAS control module Passenger-side crash zone sensor malfunction SAS control module malfunction