Details On DTCs

B1417-55: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration setting error (passenger-side crash zone sensor configuration error)
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. The SAS control module configuration setting has not been done correctly. A part which has not been set during SAS control module configuration is installed.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	A part which is not for the vehicle specification is installed. (SAS control module configuration setting not implemented or invalid) SAS control module malfunction