Details On DTCs

B10FD-87: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Signal reception error from driver-side side air bag sensor No. 1
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. Malfunction in wiring harness between driver-side side air bag sensor No. 1 and SAS control module. Driver-side side air bag sensor No. 1 malfunction
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Driver-side side air bag sensor No. 1 installation malfunction Malfunction in wiring harness (including connector/terminal) between driver-side side air bag sensor No. 1 and SAS control module Driver-side side air bag sensor No. 1 malfunction SAS control module malfunction