Details On DTCs

B1011-95: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module connector partially disconnected
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. No continuity between partial disconnection detection bar terminals of SAS control module, or there is continuity even though the measured value is outside the normal determination range.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	SAS control module connector partially disconnected SAS control module connector malfunction SAS control module malfunction