Details On DTCs

B00D5-01: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Open circuit in PAD OFF indicator circuit or short to power supply
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. Open circuit in PAD indicator request signal circuit or short to power supply.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	The body control module (BCM) stores DTCs. Malfunction in wiring harness (including connector/terminal) between indicator unit and body control module (BCM) Indicator unit malfunction SAS control module malfunction