Details On DTCs
B00D2-29: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Communication error with instrument cluster (air bag/seat belt pre-tensioner system warning light status mis-matched) |
| Detection condition |
Determination conditions |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure.
- The air bag warning light/pre-tensioner warning light on request sent from the SAS control module does not match the instrument cluster air bag warning light/pre-tensioner warning light status.
|
| Preconditions |
|
| Determination period |
|
| Fail-safe |
|
| Vehicle status when DTCs are output |
|
| Possible cause |
- DTCs are stored in the SAS control module. (Communication error between instrument cluster and SAS control module)
- Instrument cluster malfunction (instrument cluster installation malfunction or air bag warning light/pre-tensioner warning light malfunction)
- SAS control module malfunction
|