Details On DTCs

B00C2-93: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Seat weight sensor (RF) malfunction
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. The SAS control module receives a seat weight sensor (RF) malfunction signal from the seat weight sensor control module.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Malfunction in wiring harness (including connector/terminal) between seat weight sensor (RF) and seat weight sensor control module Seat weight sensor (RF) malfunction Seat weight sensor control module malfunction SAS control module malfunction