Details On DTCs

B00B5-1D: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Driver-side seat track position sensor circuit current out of range
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. Driver-side seat track position sensor malfunction Malfunction in wiring harness between driver-side seat track position sensor and SAS control module.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Driver-side seat track position sensor connector malfunction Malfunction in wiring harness (including connector/terminal) between driver-side seat track position sensor and SAS control module Driver-side seat track position sensor malfunction SAS control module malfunction