Connected device information verification
- Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
- Select in the following order from the diagnostic assist function initial screen.
- [Service Information]
- [Connected Device Information]
- Select the applicable connected device and verify the connected device information.CONNECTED DEVICE INFORMATION VERIFICATION
Indication on center display Connected device Indicated information (x: Applicable, -: Not applicable) Manufacturer name Software version Part number Serial number SiriusXM serial number In-vehicle Digital Owner's Manual version CMU Connectivity master unit (CMU) x x x x - x AMP Audio amplifier x x x x - - RT Remote tuner (RT) x x x - x - DISP Center display x x x x - - RSES Displays on the center display, but does not operate. DECK CD player or DVD/CD player x x x - - - MIC Microphone x x x x - - TCU Emergency call unit/telematics communication unit x x x x - - DSRC Displays on the center display, but only functions if a Mazda genuine part (accessory) is equipped. COMMANDER Commander switch x x x x - - - Ends the diagnostic assist function. (See ENDING PROCEDURE .)