TV reception condition verification

Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
Select in the following order from the diagnostic assist function initial screen.
1. [Functional Inspection/Adjustment]
2. [DTV Reception Inspection]

Rotate the commander knob to change the channel and verify the following TV signal reception condition.

TV reception condition verification screen

G16690838

Courtesy of MAZDA MOTORS CORP.

-: Not applicable

TV RECEPTION CONDITION VERIFICATION

No.	Name	Unit	Content/function
1	Channel number	-	Indicates the received channel number.
2	Remote control ID	-	Indicates the received remote control ID.
3	Reception level	dB	Indicates the reception level of each antenna.
4	Resultant C/N value	dB	Indicates the resultant C/N value of 4 TV antennas.
5	Stop inspection/restart inspection button	-	[Stop Inspection]: Stops TV signal reception condition verification. The indication switches to [Re-inspection] when stopped. [Re-inspection]: Starts TV signal reception condition verification. The indication switches to [Stop Inspection] during verification.
6	Monitor image	-	Indicates the image of the received channel.

Ends the diagnostic assist function. (See ENDING PROCEDURE .)