DAB status verification
- Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
- Select in the following order from the diagnostic assist function initial screen.
- [Functional Inspection/Adjustment]
- [DAB Status]
- Verify the following information.
-: Not applicable
DAB STATUS VERIFICATIONIndication on center display Unit Content/function Ensemble Seek: Up - Change the ensemble upward. Ensemble Seek: Down - Change the ensemble downward. Service Up Based on List - Change the broadcasting station upward. Service Down Based on List - Change the broadcasting station downward. CHID/Eid /0x Indicates the CHID value and Eld value. Sid/SCIdS/Ps 0x/0x/ Indicates the Sid value and SCldS value. TransMode/PL / Indicates the transmission/transaxle mode (Mode/Mode/Mode/Mode) and protection level (EEP_1_A/EEP_2_A/EEP_3_A/EEP_4_A/EEP_1_B/EEP_2_B/EEP_3_B/EEP_4_B/UEP_1/UEP_2/UEP_3/UEP_4/UEP_5). Audio/Codec / Indicates audio (Stereo/Joint Stereo/Dual Channel/Mono/Surround/Pstereo) and codec (DAB/DAB+/DMB). BR/SBR/Asu kbps// Indicates the bit rate value and Asu value. LSN Tuner - Indicates the LSN tuner (Tuner 1/Tuner 2/Tuner 3). RSSI dBm Indicates the RSSI value. SNR dB Indicates the SNR value. DAB Status - Indicates the DAB status (DAB/Mute/FM Link). MSC BER E± Indicates the MSC bit error value. FM PI/Qual 0x/ Indicates the RDS PI code in the FM link and FM reception level (No Signal/Medium/Good). - Ends the diagnostic assist function. (See ENDING PROCEDURE .)