Commander switch inspection
- Launch the diagnostic assist function. (See ACTIVATION PROCEDURE .)
- Select in the following order from the diagnostic assist function initial screen.
- [Functional Inspection/Adjustment]
- [Touch Pad/Commander Inspection]
- Verify if the indication on the center display changes correctly in conjunction with the commander switch operation.
-: Not applicable
COMMANDER SWITCH INSPECTIONCommander switch operation Indication on center display Action Operation SW Touch Pad Inspection/Operation Commander Inspection/Operation Commander knob touch pad is touched - Touch - Inspect the following if the indication on the center display does not operate correctly in conjunction with the commander switch operation. - Commander switch related DTCs (See DTC TABLE [CMU] .)
- Commander switch related symptom troubleshooting (See SYMPTOM TROUBLESHOOTING [ENTERTAINMENT SYSTEM] .)
- Wiring harness between commander switch and connectivity master unit (CMU)
Commander knob touch pad is released Release Commander knob is pressed Commander - Press Commander knob is released Release Commander knob is rotated clockwise Right Turn Commander knob is rotated counterclockwise Left Turn Commander knob is tilted up Tilt Up Commander knob is tilted down Tilt Down Commander knob is tilted right Right Tilt Commander knob is tilted left Left Tilt Home button is pressed HOME - Press Home button is released Release Entertainment button is pressed Entertainment - Press Entertainment button is released Release Map button is pressed Navi - Press Map button is released Release Favorites button is pressed Favorite - Press Favorites button is released Release Volume knob is pressed Volume - Press Volume knob is released Release Volume knob is rotated clockwise Right Turn Volume knob is rotated counterclockwise Left Turn - Ends the diagnostic assist function. (See ENDING PROCEDURE .)