Details On DTCs

U2301-64: (CMU) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration data of body control module (BCM) not matched
Detection condition	Determination conditions	The connectivity master unit (CMU) detects that the configuration data of the connectivity master unit (CMU) and the body control module (BCM) is not matched.
	Preconditions	Not applicable
	Malfunction determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Inappropriate body control module (BCM) replacement procedure Connectivity master unit (CMU) malfunction Body control module (BCM) malfunction