DTC U213C-00: Communication Error With Electronically Controlled Brake Unit/DSC HU/Cm
U213C-00: (CMU) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Communication error with electronically controlled brake unit/DSC HU/CM |
| Detection condition |
- The connectivity master unit (CMU) detects a communication interruption or communication error with the electronically controlled brake unit/DSC HU/CM.
|
| Fail-safe |
|
| Possible cause |
- Malfunction in CAN communication line between electronically controlled brake unit/DSC HU/CM and connectivity master unit (CMU)
- Electronically controlled brake unit/DSC HU/CM malfunction (Refer to [ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION]
in service information.) (Refer to DSC HU/CM REMOVAL/INSTALLATION
in service information.)
- Connectivity master unit (CMU) malfunction (Refer to CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION
in service information.)
|
| Repeatability verification procedure |
|
| System wiring diagram |
|