DTC B108E-49: Center Display Internal Malfunction
B108E-49: (CMU) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Center display internal malfunction |
| Detection condition |
- The connectivity master unit (CMU) detected a center display internal malfunction.
|
| Fail-safe |
|
| Possible cause |
- DTCs are stored in the connectivity master unit (CMU). (DTC U0186:02, U0186:08, U2145:02: or U2145:08) (See U0186:02 [CMU]
.) (See U0186:08 [CMU]
.) (See U2145:02 [CMU]
.) (See U2145:08 [CMU]
.)
- Center display malfunction (center display internal malfunction) (Refer to CENTER DISPLAY REMOVAL/INSTALLATION
in service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See
CLEARING DTC.)
- Switch the ignition off/main power OFF.
- Switch the ignition ON (engine off or on)/main power ON (READY off or on) and wait for 30 s or more.
|
| System wiring diagram |
|