DTC U3000-54: Electric Parking Brake Motor Gear Unit Position Learning Not Completed [Electric Parking Brake Control Module]: Notes
DTC U3000:54 (ELECTRIC PARKING BRAKE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Electric parking brake motor gear unit position learning not completed |
| Detection condition |
- After replacing the electric brake control module, a condition in which the electric parking brake motor gear unit position learning has not been completed is detected.
|
| Fail-safe |
Not applicable |
| Possible cause |
CAUTION:
- After replacing the electric parking brake control module, if the electric parking brake has never been operated/released, a DTC may be output. After replacing the electric parking brake control module, operate/release the electric parking brake and have the system learn the electric parking brake motor gear unit position.
- Electric parking brake control module malfunction
|
| System wiring diagram |
Not applicable |