LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2023 >> CX-5 Turbo >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Beep Sound Adjustment >> Without Parking Sensor Switch >> Front parking sensor buzzer

Front parking sensor buzzer

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Lower decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    3. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    4. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Connect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  4. Ground parking assist unit (ultrasonic) terminal V to the body using a jumper wire.
    G15678067Courtesy of MAZDA MOTORS CORP.
  5. Switch the ignition ON.
  6. Verify that the parking sensor buzzer sounds once.
  7. Disconnect the body ground.
  8. Ground parking sensor control module terminal V to the body for approx. 0.5 s using a jumper wire to change the parking sensor buzzer volume.
    G15678068Courtesy of MAZDA MOTORS CORP.
  9. Disconnect the body ground and wait for approx. 10 s.
scientia non olet · About LEMON Manuals