Insulator installation note
WARNING: This page is about a different variant/trim than selected.
- Temporarily tighten bolt B.
 Courtesy of MAZDA MOTORS CORP.
|
- Install the insulator and temporarily tighten bolts A and C in the order of A and C.
 Courtesy of MAZDA MOTORS CORP.
|
- Completely tighten bolts A, B, and C in the order of A, B, C.
Tightening torque
19-25 N.m {2.0-2.5 kgf.m, 15-18 ft.lbf}