LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata RF Club >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Automatic Transmission Fluid (ATF) Level Adjustment >> ATF Temperature Verification >> Using the M-MDS

Using the M-MDS

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the vehicle DLC-2.
  2. Inspect the ATF temperature using the PID/data monitor "TFT".
  3. Warm up the automatic transmission until the ATF temperature is 57.5-62.5°C {136-144°F}.
scientia non olet · About LEMON Manuals