Diagnostic Procedure
DTC U3000:11/U3000:12/U3000:46/U3000:47/U3000:56/U3000:96 (EVP CONTROL UNIT) DIAGNOSTIC PROCEDURE
| Step | INSPECTION | Action | |
|---|---|---|---|
| 1 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Replace the EVP control unit, then go to the next Step. (See EVP CONTROL UNIT REMOVAL/INSTALLATION .) |
| No | Go to the next Step. | ||
| 2 | VERIFY NO DTC IS PRESENT
|
Yes | Go to the applicable DTC inspection. (See DTC TABLE [EVP CONTROL UNIT] .) |
| No | DTC troubleshooting completed. | ||