DTC C1036-12: Electric Vacuum Pump Relay 2 - Short To Power Supply [EVP Control Unit]: Notes

DTC C1036-12: (EVP CONTROL UNIT) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C1036:12	Electric vacuum pump relay 2: short to power supply
DETECTION CONDITION		EVP control unit terminal E voltage of 2 V or more is detected when the electric vacuum pump is operated.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [EVP CONTROL UNIT] .)
POSSIBLE CAUSE		Short to power supply circuit in electric vacuum pump relay 2 (built-into EVP control unit) circuit EVP control unit malfunction
SYSTEM WIRING DIAGRAM		-