DTC C1035-11: Electric Vacuum Pump Relay 1 - Short To Ground [EVP Control Unit]: Notes

DTC C1035-11: (EVP CONTROL UNIT) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C1035:11	Electric vacuum pump relay 1: short to ground
DETECTION CONDITION		Resistance between the EVP control unit terminal C circuit and ground is less than 10 m ohm.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [EVP CONTROL UNIT] .)
POSSIBLE CAUSE		Short to ground circuit in electric vacuum pump relay 1 circuit EVP control unit malfunction
SYSTEM WIRING DIAGRAM		-