DTC C101C-72: Electric Vacuum Pump - Logic Inconsistent [EVP Control Unit]: Notes

DTC C101C-72: (EVP CONTROL UNIT) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C101C:72	Electric vacuum pump: logic inconsistent
DETECTION CONDITION		Control status and the PID value of electric vacuum pump relay 1 or 2 (built into EVP control unit) do not correspond for a continuous 0.2 s.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [EVP CONTROL UNIT] .)
POSSIBLE CAUSE		EVP control unit power supply circuit malfunction Improper operation of electric vacuum pump relay 1 (built-into EVP control unit) Improper operation of electric vacuum pump relay 2 (built-into EVP control unit) EVP control unit malfunction
SYSTEM WIRING DIAGRAM		-