DTC C101C-71: Electric Vacuum Pump - Stuck [EVP Control Unit]: Notes

DTC C101C-71: (EVP CONTROL UNIT) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C101C:71	Electric vacuum pump: stuck
DETECTION CONDITION		Electric vacuum pump drive circuit electrical current is high for a continuous 3 s when the electric vacuum pump is operated.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [EVP CONTROL UNIT] .)
POSSIBLE CAUSE		EVP control unit power supply circuit malfunction EVP control unit malfunction
SYSTEM WIRING DIAGRAM		-