LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata RF Club >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Scuff Plate Removal/Installation

Scuff Plate Removal/Installation

  1. Hold the shaded area shown in the illustration, open the scuff plate in the direction of arrow (1), move the scuff plate in the direction of arrow (2) while detaching scuff plate tab A from the front side trim, and detach the scuff plate clips from the inner panel.
    G14603060Courtesy of MAZDA MOTORS CORP.
  2. Hold the shaded areas shown in the illustration, move the scuff plate in the direction of the arrow, and detach the scuff plate clips from the inner panel.
    G14603061Courtesy of MAZDA MOTORS CORP.
  3. Hold the shaded areas shown in the illustration, move the scuff plate in the direction of the arrow, and detach the tab and clip of the scuff plate from the inner panel.
    G14603062Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals