LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata RF Club >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front CROSSMEMBER Under Cover Removal/Installation

Front CROSSMEMBER Under Cover Removal/Installation

  1. Lift up the vehicle.
  2. Remove the bolts.
    Fig 1: Front Crossmember Under Cover Bolts With Torque Specification
    G14602732Courtesy of MAZDA MOTORS CORP.
  3. Remove the front crossmember under cover.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals