LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata RF Club >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Indicator Unit Inspection >> LED Illumination Inspection >> When Using M-MDS

When Using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "DataLogger".
    2. Select "Modules".
    3. Select "IC".
  3. Using the simulation function item LCD_SEG, verify that the warning/indicator lights are displayed as shown in the following illustration.
G14603466Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals