LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-9 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Liftgate Upper Trim Removal/Installation

Liftgate Upper Trim Removal/Installation

  1. Take the shaded areas shown in the figure, detach the tab while pulling the liftgate upper trim in the direction of arrow (1) shown in the figure, then detach clip A, clips B, tab, and pin while pulling in the direction of arrow (2).
    G11434977Courtesy of MAZDA MOTORS CORP.
  2. Take the shaded areas shown in the figure, detach the tab while pulling the liftgate upper trim in the direction of arrow (1) shown in the figure, then detach clip A, clip B, and tab while pulling in the direction of arrow (2).
    G11434978Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals