Details On DTCs

WARNING: This page is about a different variant/trim than selected.

DTC P050A-00: (PCM, VIN M) DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION	Cold start IAC system performance problem
DETECTION CONDITION	Determination conditions	The difference between the actual engine speed and the target engine speed is 100 rpm or more.
	Preconditions	Engine speed: 500 rpm or more^1 Engine coolant temperature: -10-45 °C {14-113 °F}^1 Catalytic converter estimated temperature: 380 °C {716 °F} or less^1 Vehicle speed: 0 km/h {0 mph}^1 The following DTCs are not detected: ECT sensor malfunction: P0116-00:, P0117-00:, P0118-00: MAP sensor malfunction: P0069-00:, P0107-00:, P0108-00: BARO sensor malfunction: P2226-00:, P2228-00:, P2229-00: Instrument cluster malfunction: P2610-00: ^*1 : Standard can be verified by displaying PIDs using M-MDS
	Malfunction determination period	9 s period
	Drive cycle
	Self test type	CMDTC self test
	Sensor used	CKP sensor ECT sensor Limits intake air amount
FAIL-SAFE FUNCTION		Stops high pressure fuel pump control
VEHICLE STATUS WHEN DTCs ARE OUTPUT		Illuminates check engine light.
POSSIBLE CAUSE		Air suction in intake air system Drive-by-wire control system malfunction Throttle valve malfunction PCM malfunction