Related PIDs
WARNING: This page is about a different variant/trim than selected.
PID PART SPECIFICATION
| Item |
Definition |
Unit |
Condition/Specification |
| FTP |
Fuel tank pressure input from fuel tank |
Pa {KPA}, mBar {BAR}, psi, in H20 |
- Ignition switched ON (engine off): Approx. -23 Pa {-2.3 kgf/m2
, -0.0033 psi}
- Idle (after warm up): -282 - -46 Pa {-28.7 - -4.7 kgf/m2
, -0.0409 - -0.0067 psi}
- Racing (Engine speed 2, 000 rpm): -1.47 - -0.869 kPa {-0.0149 - -0.0089 kgf/cm2
, -0.213 - -0.127 psi}
- Racing (Engine speed 4, 000 rpm): -1.69 - -1.07 kPa {-0.0172 - -0.0110 kgf/cm2
, -0.245 - -0.156 psi}
|
| Fuel tank pressure sensor voltage |
V |
- Ignition switched ON (engine off): Approx. 2.6 V
- Idle (after warm up): 2.2-2.62 V
- Racing (Engine speed 2, 000 rpm): 1.9-1.91 V
- Racing (Engine speed 4, 000 rpm): 1.73-1.76 V
|