Oil Control Valve (OCV) For Cylinder Deactivation Removal/Installation: Notes
WARNING: This page is about a different variant/trim than selected.
Oil and Chemical Type
| Engine oil |
| Type: Recommended oil |
WARNING:
- A hot engine can cause severe burns. Turn off the engine and wait until it is cool before servicing.
CAUTION:
- When removing the OCV for cylinder deactivation, be careful not to allow the engine oil to contact the surrounding parts. Otherwise, it could cause a malfunction in the surrounding parts or damage to the surrounding parts.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
- Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION ).
- Remove in the order indicated in the table.
- Install in the reverse order of removal.