LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 Turbo Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical System (VIN M)) >> Engine Removal/Installation >> Engine Removal >> No. 3 engine mount, No. 4 engine mount bracket removal note

No. 3 engine mount, No. 4 engine mount bracket removal note

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • When removing/installing the engine, verify that the engine and transaxle are securely supported. Otherwise, the engine may fall off and cause serious injury or death, and damage to the vehicle.
CAUTION:
  • When supporting the engine and transaxle, insert rubber of appropriate size (approx. 20 mm {0.79 in} thickness) between the engine lifter and the oil pan, transaxle to prevent the deformation of the oil pan and damage of the transaxle.
  1. Secure the engine and transaxle using a commercially available engine lifter.
    G13672015Courtesy of MAZDA MOTORS CORP.
  2. Remove the No. 4 engine mount bracket.
  3. Remove the No. 3 engine mount.
scientia non olet · About LEMON Manuals