LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 Turbo Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical System (VIN M)) >> Cylinder Head Gasket Replacement >> Camshaft Removal Note

Camshaft Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the camshaft cap installation bolts in a few passes in the order shown in the figure and remove the camshaft caps.
    Fig 1: Camshaft Caps Bolts Loosening Sequence
    G13556633Courtesy of MAZDA MOTORS CORP.
  2. Remove the camshafts.
scientia non olet · About LEMON Manuals