Simulation item table
WARNING: This page is about a different variant/trim than selected.
SIMULATION PART DESCRIPTION
| Item | Applicable component | Operation | Operation condition | |
|---|---|---|---|---|
| Engine condition | Other condition | |||
| EVAPCP | Purge solenoid valve | Changes % and forcibly drives/stops purge solenoid valve. |
|
Not applicable |
| INJ_1 | Fuel injector No. 1 | Select OFF to forcibly stop the fuel injector No. 1. | Not applicable |
WARNING:
|
| INJ_2 | Fuel injector No. 2 | Select OFF to forcibly stop the fuel injector No. 2. | ||
| INJ_3 | Fuel injector No. 3 | Select OFF to forcibly stop the fuel injector No. 3. | ||
| INJ_4 | Fuel injector No. 4 | Select OFF to forcibly stop the fuel injector No. 4. | ||