Fuel injection control (-) signal
WARNING: This page is about a different variant/trim than selected.
 Courtesy of MAZDA MOTORS CORP.
|
PCM terminals
- Fuel Injection No. 1: 1DH(+)-body ground(-)
- Fuel Injection No. 2: 1CZ(+)-body ground(-)
- Fuel Injection No. 3: 1CV(+)-body ground(-)
- Fuel Injection No. 4: 1DD(+)-body ground(-)
Oscilloscope setting
- 10 V/DIV (Y), 5 ms/DIV (X), DC range
Vehicle condition
- Idle after warm up