LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 Turbo Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Starting System (VIN M)) >> Starter Inspection >> On-vehicle Inspection

On-vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the battery is fully charged. (See BATTERY INSPECTION ).
  2. The starter is normal if it rotates smoothly and without any noise when the engine is cranked.
    • If the starter does not operate, inspect the following:
      • Remove the starter, and inspect the starter unit.
      • Inspect the related wiring harnesses, the ignition switch, and the transaxle range switch.