Details On DTCs

WARNING: This page is about a different variant/trim than selected.

DTC P2B61-00: (PCM, VIN M) DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION	Coolant control valve position sensor circuit range/performance
DETECTION CONDITION	Determination conditions	The coolant control valve control duty value is 89% or more for a continuous 2 s.
	Drive cycle
	Self test type	CMDTC self test, KOEO self test, KOER self test
	Sensor used	Coolant control valve position sensor
FAIL-SAFE FUNCTION	PCM restricts engine torque.
VEHICLE STATUS WHEN DTCs ARE OUTPUT	Illuminates check engine light.
POSSIBLE CAUSE	Coolant control valve/coolant control valve position sensor connector or terminals malfunction PCM connector or terminals malfunction Coolant control valve sticking, or foreign matter penetration Short to ground in wiring harness between the following terminals: Coolant control valve/coolant control valve position sensor terminal A-PCM terminal 1CW Coolant control valve/coolant control valve position sensor terminal B-PCM terminal 1CX Coolant control valve/coolant control valve position sensor terminal C-PCM terminal ID Coolant control valve/coolant control valve position sensor terminal D-PCM terminal 1I Coolant control valve/coolant control valve position sensor terminal E-PCM terminal 1BG Coolant control valve/coolant control valve position sensor circuits are shorted to each other Open circuit in wiring harness between the following terminals: Coolant control valve/coolant control valve position sensor terminal A-PCM terminal 1CW Coolant control valve/coolant control valve position sensor terminal B-PCM terminal 1CX Coolant control valve/coolant control valve position sensor terminal C-PCM terminal 1D Coolant control valve/coolant control valve position sensor terminal D-PCM terminal 1I Coolant control valve/coolant control valve position sensor terminal E-PCM terminal 1BG Coolant control valve position sensor malfunction PCM malfunction