LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 Turbo Signature >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Cooling System (VIN M)) >> Coolant Control Valve Removal/Installation >> Heater Hose Installation Note

Heater Hose Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Connect the heater hose to the coolant control valve so that the projection position is aligned with the mark.
G12184195Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals