Related PIDs

WARNING: This page is about a different variant/trim than selected.

PID PART SPECIFICATION

Item (definition)	Unit/Condition	Definition	Condition/Specification (Reference)
BARO	KPa {MPA}, mBar {BAR}, psi, in H20	Barometric pressure	Displays BARO
ECT	°C, °F	Engine coolant temperature	Displays ECT
ECT	V	Engine coolant temperature	ECT is 20 °C {68 °F}: Approx. 3.10 V ECT is 40 °C {104 °F}: Approx. 2.16 V ECT is 60 °C {140 °F}: Approx. 1.40 V ECT is 80 °C {176 °F}: Approx. 0.87 V ECT is 100 °C {212 °F}: Approx. 0.54 V
IAT2	°C, °F	IAT sensor No. 2 voltage	Displays IAT (No. 2)
IAT2	V	IAT sensor No. 2 voltage	IAT2 is 20 °C {68 °F}: Approx. 3.57 V IAT2 is 40 °C {104 °F}: Approx. 2.70 V IAT2 is 60 °C {140 °F}: Approx. 1.87 V
MAF	g/Sec	Mass air flow	Displays MAF
MAF	V	Mass air flow	Ignition switched ON (engine off) (MAF: 0.00 g/s {0 lb/min}): Approx. 1.69 V (ECT is 53 °C {127 °F}) Idle (after warm up) (MAF: 2.50 g/s {0.331 lb/min}): Approx. 1.89 V (ECT is 93 °C {199 °F}) Racing (engine speed is 2, 000 RPM) (MAF: 3.80 g/s {0.503 lb/min}): Approx. 2.02 V (ECT is 95 °C {203 °F})
MAP	KPa {MPA}, mBar {BAR}, psi, in H20	Manifold absolute pressure	Displays MAP