LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical System (VIN Y)) >> Engine Mount Disassembly/Assembly >> No. 1 Engine Mount (AWD) >> No. 1 engine mount removal note (AWD)

No. 1 engine mount removal note (AWD)

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the No. 1 engine mount rubber installation bolt (front crossmember side).
    G13107115Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolts shown in the figure and remove the No. 1 engine mount bracket A.
    G13107116Courtesy of MAZDA MOTORS CORP.
  3. Remove the No. 1 engine mount rubber.
  4. Remove the transfer. (See TRANSFER REMOVAL/INSTALLATION [GW6AX-EL (VIN Y)] ).
  5. Remove the bolts shown in the figure and remove the No. 1 engine mount bracket B.
    G13107117Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals