LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical System (VIN Y)) >> Cylinder Head Gasket Replacement >> Water Pipe Component Installation Note

Water Pipe Component Installation Note

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not apply oil (such as engine oil, ATF) to the O-ring of the water pipe component. Otherwise, the O-ring could swell causing a seal malfunction.
  1. Apply engine coolant to the O-ring.
  2. Install the O-ring to the water pipe component.
  3. Insert the water pipe component into the flange being careful not to damage the O-ring. 4. Tighten the bolts shown in the figure.
    Fig 1: Water Pipe Components, Water Pump And Bolts With Torque Specification
    G11436526Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals