LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical System (VIN Y)) >> Cylinder Head Gasket Replacement >> Oil Cooler Pipe Installation Note

Oil Cooler Pipe Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the oil cooler pipe component.
    Fig 1: Oil Cooler Pipe Component, Water Pump And Bolt With Torque Specification
    G11436525Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals