LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (On-Board Diagnostic - Engine Control System (VIN Y) (1 Of 7)) >> DTC P0107-00: Map Sensor Circuit Low Input >> Related PIDs

Related PIDs

WARNING: This page is about a different variant/trim than selected.
PID PART SPECIFICATION

Item (definition) Unit/Condition Definition Condition/Specification (Reference)
MAP KPa {MPA}, mBar {BAR}, psi, in H20 Manifold absolute pressure input from MAP sensor
  • Displays MAP
MAP_V V MAP sensor voltage
  • Ignition switched ON (engine off) (no load) (MAP: 102 kPa {1.04 kgf/cm2 , 14.8 psi}): Approx. 1.75 V
  • Idle (after warm up) (no load) (MAP: 30 kPa {0.31 kgf/cm2 , 4.4 psi}): Approx. 0.68 V
  • Racing (engine speed is 2, 000 rpm) (no load) (MAP: 27 kPa {0.28 kgf/cm2 , 3.9 psi}): Approx. 0.61 V
scientia non olet · About LEMON Manuals