LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (On-Board Diagnostic - Engine Control System (VIN Y) (1 Of 7)) >> DTC P0014-00: Hydraulic Variable Valve Timing Control System, Over-Advanced >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph}(to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph}again.
scientia non olet · About LEMON Manuals