Shift Point Is High Or Low: Notes
WARNING: This page is about a different variant/trim than selected.
SHIFT POINT IS HIGH OR LOW (GW6AX-EL) DESCRIPTION AND POSSIBLE CAUSE
| TROUBLESHOOTING ITEM |
Shift point is high or low |
| DESCRIPTION |
- Shift point considerably different from automatic shift diagram.
- Shift delays when accelerating.
- Shift occurs suddenly when accelerating and engine speed does not increase.
|
| POSSIBLE CAUSE |
- Signal malfunction
- APP sensor malfunction
- BARO sensor malfunction
- Brake switch malfunction
- ECT sensor malfunction
- IAT sensor No. 1 malfunction
- Low-G (XY) sensor (built into SAS control module) malfunction
NOTE:
- When driving on high-altitude roads, the TCM determines that the driving mode is the AAS mode, and may change to a different shift timing from the normal timing.
- When SPORT mode is selected, a gear lower than NORMAL mode is selected, and the gear is maintained for a longer period of time. (VIN Y)
- If the engine coolant temperature is low, a gear lower than when in normal mode is selected.
|