Engine Stalls When Shifted To D, M Or R Position: Notes

WARNING: This page is about a different variant/trim than selected.

ENGINE STALLS WHEN SHIFTED TO D, M OR R POSITION (GW6AX-EL) DESCRIPTION AND POSSIBLE CAUSE

TROUBLESHOOTING ITEM	Engine stalls when shifted to D, M or R position
DESCRIPTION	Engine stalls when shifting from N or P position to D, M or R position at idle.
POSSIBLE CAUSE	Not within idle speed specification TCC piston malfunction (solenoid drive circuit, hydraulic passage blockage, poor operation) Output solenoid valve malfunction (stuck) TCC control solenoid Torque converter malfunction