LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Starting System (VIN Y)) >> Starter Inspection >> Magnetic switch

Magnetic switch

WARNING: This page is about a different variant/trim than selected.
  1. Inspect for continuity between terminals S and M using a tester.
    G11433349Courtesy of MAZDA MOTORS CORP.
    • If there is no continuity, replace the magnetic switch.
  2. Inspect for continuity between terminal S and the body using a tester.
    G11433350Courtesy of MAZDA MOTORS CORP.
    • If there is no continuity, replace the magnetic switch.
  3. Verify that there is no continuity between terminals M and B using a tester.
G11433351Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals