DTC P0707-00: Transaxle Range Sensor Circuit Low Input: Notes

WARNING: This page is about a different variant/trim than selected.

DTC P0707-00: (TCM - GW6AX-EL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0707:00	Transaxle range sensor circuit low input
DETECTION CONDITION	Under the following condition, incorrect voltage in any one of transaxle range sensors 1 to 4: Battery voltage is 8 V or more.
FAIL-SAFE FUNCTION	Inhibits learning control. Inhibits manual mode. Inhibits neutral idle control. Inhibits AAS.
POSSIBLE CAUSE	Transaxle range sensor (built-into TCM) malfunction
SYSTEM WIRING DIAGRAM	Not applicable