Inappropriate Operation And Control Record
WARNING: This page is about a different variant/trim than selected.
How to Use
NOTE:
- Because the inappropriate operation and control record cannot be cleared, always check the odometer value and verify that repairs have not already been performed.
- If any inappropriate operation and control record is displayed, refer to the corresponding troubleshooting for the inappropriate operation and control code to explain to the customer, and perform malfunction diagnosis. (See Inappropriate Operation and Control Code Table below)
Operation Procedure
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initial screen.
- "Operational Record"
- Then, select the followings from the screen menu.
- "Inappropriate Operation and Control Record"
- "PCM"
- Display the DTC store record history according to the screen instructions.
Inappropriate Operation and Control Code Table
INAPPROPRIATE OPERATION AND CONTROL CODE DESCRIPTION
| Inappropriate operation and control code | Inappropriate operation and control code type | Reference |
|---|---|---|
| 0x30 | Temperature restriction control | (See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL) ). |
| 0x43 | Unusual voltage of a battery | (See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY) ). |