Purge Solenoid Valve Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION ).

Remove in the order indicated in the table.

Fig 1: Purge Solenoid Valve Components With Torque Specification

Courtesy of MAZDA MOTORS CORP.

PART DESCRIPTION

1	Purge solenoid valve connector
2	Evaporative hose No. 1 (See Evaporative Hose No. 1 Installation Note ).
3	Evaporative hose No. 3 (See Evaporative Hose No. 3 Installation Note ).
4	Catch tank
5	Evaporative hose No. 2 (See Evaporative Hose No. 2 Installation Note ).
6	Purge solenoid valve